Calcium Sulphat Floor System
28mm thickness Calcium Sulphat panel 
4 pieces of black PVC strips along the side of the panel 
covering:Steelplate,HPL,Vinyl,rubber,Linoleum,Carpet

Technical parameter

Floor covering

The panel is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed cement. The borders of the panel are punched with corner-lock holes.

The system is composed of panel, pedestal and anti-vibration cushion and screws. The panel is place on the pedestals with anti-vibration cushions, and then it is locked through corner-lock holes with the screws.
The pedestal ,whose height is adjustable and fixable, is zinc and aluminum structure.

     SURFACE OF PANEL                             BOTTOM OF PANEL                        FOLD EDGING   

Featured Benefits:
1、Designed specifically for office building
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age 

Technical parameter

Panel Type	Size	Concentrated Load		Impact Load	Uniform Load	Ultimate Load	Rolling Load		Fire Protection
	MM	KN	LB	KG	KN/sqm	N	10pass	10000pass
CXB680	600X600X32	3.2	680	45	11.3	9070	2.2	1.6	National Standard Grade A-1 Incombustible ASTM E84-01: Flame Spread:0 Smoke Density:0
CXB800	600X600X32	3.6	800	45	13.6	10880	3.1	2.3
CXB1000	600X600X32	4.5	1000	68	16.7	13600	3.6	3.1
CXB1250	600X600X32	5.5	1250	68	19.1	17000	4.5	3.6

Application :
This kind of panel is suitable for high-class office buildings and offices of banks, tax administration, commercial and industrial bureau, customs, insurance companies, government and so on.

The panel is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed cement. The borders of the panel are punched with corner-lock holes.

The system is composed of panel, pedestal and anti-vibration cushion and screws. The panel is place on the pedestals with anti-vibration cushions, and then it is locked through corner-lock holes with the screws.
The pedestal ,whose height is adjustable and fixable, is zinc and aluminum structure.

     SURFACE OF PANEL                             BOTTOM OF PANEL                      CUT EDGING   

Featured Benefits:
1、Designed specifically for office building
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age 

Technical paramter

Panel Type	Size	Concentrated Load		Impact Load	Uniform Load	Ultimate Load	Rolling Load		Fire Protection
	MM	KN	LB	KG	KN/sqm	N	10pass	10000pass
CXB680	600X600X32	3.2	680	45	11.3	9070	2.2	1.6	National Standard Grade A-1 Incombustible ASTM E84-01: Flame Spread:0 Smoke Density:0
CXB800	600X600X32	3.6	800	45	13.6	10880	3.1	2.3
CXB1000	600X600X32	4.5	1000	68	16.7	13600	3.6	3.1
CXB1250	600X600X32	5.5	1250	68	19.1	17000	4.5	3.6

Application :
This kind of panel is suitable for high-class office buildings and offices of banks, tax administration, commercial and industrial bureau, customs, insurance companies, government and so on.

The panel is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed cement. The borders of the panel are punched with corner-lock holes.

The system is composed of panel, pedestal and anti-vibration cushion and screws. The panel is place on the pedestals with anti-vibration cushions, and then it is locked through corner-lock holes with the screws.
The pedestal ,whose height is adjustable and fixable, is zinc and aluminum structure.

     Surface Of Panel                              Bottom Of Panel                 Fold  Edge

Featured Benefits:
1、Designed specifically for office building
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age

Use Site :
This kind of panel is suitable for high-class office buildings and offices of banks, tax administration, commercial and industrial bureau, customs, insurance companies, government and so on.

Technical parameter

In the installation of an access floor, there are certain criteria that should be followed. These are listed in the general
order of sequence。Requirements for the ground：
1. The panels should be laid after the interior decoration finishes.
2. The ground should be flat, clean and dry.
3. Cables, electric lines, water pipes, air pipes and air condition system which are placed under the floor should
be prior to the installation of the panels.
4. The height of the base for huge and heavy equipment should remain the same with that of the panel surface after
its installation.
5. Electric power(220v/50HZ) and water supply should be provided on site.

Tools for installation
1、professional cutting saw
2、laser leveling apparatus and net laser scanner
3、bubble leveling apparatus, band tape and ink recorder.
4、panel-lifter, spanner and screw-drivers
5、dust cleaner, broom and cloth

Installation Step:
STEP 1. Check the room dimensions and configuration against approved drawings. Using a builder's transit or laser, shoot in the areas to receive access floor to determine how much variation there is in the level of the subfloor within the room and at the termination points, such as elevator and door sills and concrete ledges. If the floor cannot be installedyou’re your drawings, notify the general contractor superintendent for agreement on corrective action.The FFH may have to be changed.

STEP 2. First mark the installation height of the panel on the wall to ensure the flatness of the panels. Then measure the length and width of the ground and find the basic position of installation. And then form a square lattice with pedestals and the conjuncture of the square lattice is the position of the pedestal base. The cutting of the panels should be minimized to ensure the wonderful appearance after installation. Recommended minimum size of the cut panels for proper support is 6 inches wide.

STEP 3. Put the pedestals and stringers in the conjunctures of the square lattice, and adjust the height of the pedestals, finally set the panel in the lattice formed by the pedestals and stringers.

STEP 4. If the remaining size close to the wall is smaller than the size of a panel, cutting becomes necessary. The cut edge must be smoothed in case workers get hurt while dealing with it.

STEP 5. While laying the panel, bubble leveling apparatus can be used to make sure of the surface flatness. The height of the panels can be adjusted through pedestal adjustment. While laying the panel, it should be handled with care to avoid the damage of the panels or rubber edges. Meanwhile, cleaning should be conducted while laying in case the dust and odds should be left under the panels.

STEP 6. If a panel rocks diagonally when placed in the system, turn it one quarter (90°) turn and check it again. If the panel continues to rock when rotated, some debris may be between the panel bottom and the pedestal head or stringer. Also check to make sure pedestal is not tilted, stringers are properly seated and that panel edges are flush. If the panel still rocks, set it aside to be used as perimeter cut panel. The pedestals should not be adjusted unless three or four panels supported on it are rocking. At this point, make a minor elevation adjustment to the pedestal. When installing carpeted panels, the carpet grain direction must be controlled. Each panel has an arrow on the bottom indicating proper carpet grain. All panels must be installed with the grain in the same direction. Therefore, they cannot be turned to adjust for rockers. The panel can be bumped or the pedestal assemblies adjusted.It may require two or three pedestals in a row to be adjusted.

STEP 7. If heavy equipment are to put, the panels used for bearing the heavy equipment should be strengthened with dense pedestals. If rolling materials, equipment or gang boxes across installed A/F, then 1/4-inch tempered masonite or 1/2-inch plywood should be used as pathways to avoid any damage to the top surface of the access floor panels.

STEP 8. While cutting HPL, 6-8 anti-crack holes should be made at its concave opening to prevent the crack of HPL.

Inspection standard for the panel laying
1、The ground under the raised panels and the surface of the panels should be clean and dust-free.
2、 Panel surface should have no scratches, no coating drop-out and no damage of the rubber edges.
3、 The panels, after being finished, should be stable and firm. People walking on them should not feel shaking and no unpleasant noise between the rub of the edges can be heard.
4、 The edges of the panels should be in the same level and the height between two adjacent panels should be less than 1mm, 2.5mm in an length of 6 metres and 5mm in the whole.
5、 Panels should be naturally and closely jointed with a space of less than 1mm between two adjacent panels.

Net Floor With Slots (500x500mm)
The raised panel with slot is a new design used for office buildings. It is featured by combining the panel with the raised multi-way slots for cables. It can lower the height of the finished floor panel and help to optimize the room space available. The layout of the cables and wires would be more flexible with this design. Cables and wires would be laid out into the slots and can reach any place of the office rooms along with the slots. Besides. strong and weak currents can be isolated by marking the slots with colors and notes, which would greatly facilitate both the second layout and future maintenance.
The panel is made of good quality cold-rolled steel sheets which are punched ,spot-welded ,coated with solid resin rounded with oxygen .Inside of the panel is filled with foamed cement .the wide of the panel is 15mm ,the concave (3mm) is for installing the pedsta and there is four M12 screw bars .
The system is composed of panel, Linking-Base, Central Cover-board, Rim Cover-board,and Bonding Construction. Each of the panel has 4 screw bars,it has been a fixed height when the products come out from the factory .when construct on the spot ,Bond the 4 bases throng the bottom-linking ,then the fixed distance naturally formed and the pedstal install area come up. Linking-Base is Used for linking the panel;Central Cover-board is Installed in the position of linking pedstal; Rim Cover-board is Installed between the panel and four corners of the pedstal.

Featured Benefits
Convenience:
1、Easy outlet line system
2、Outlet that needn''''t any cutting
3、Apply for any outlet-box
4、Simply adjust the position according to your demand

Safety
1、Reduced weight :about 2/3 of the HPL Panels
2、Safe fireproof: All-steel material ,noncombustible
3、Each base has its own bottom ,so it won’t collapse even the earthquake come down.

Flexibility
1、Simple line install or reinstall
2、Easily change
3、High extension and low cost
4、90% of the appurtenances can be reused after changing

	The Reticulated Cable Trench System offers high accessibility to office users
	The system is competent to install at low profile under 10 cm
	Completely non-combustible
	Easy and quick accessibility, panels are structured with 4 built-in pedestals

The panel is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed cement. The borders of the panel are punched with corner-lock holes.

The system is composed of panel, pedestal and anti-vibration cushion and screws. The panel is place on the pedestals with anti-vibration cushions, and then it is locked through corner-lock holes with the screws.
The pedestal ,whose height is adjustable and fixable, is zinc and aluminum structure.

     SURFACE OF PANEL                             BOTTOM OF PANEL                        FOLD EDGING   

Featured Benefits:
1、Designed specifically for office building
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age 

Technical Parameter

Panel Type	Size	Concentrated Load		Impact Load	Uniform Load	Ultimate Load	Rolling Load		Fire Protection
	MM	KN	LB	KG	KN/sqm	N	10pass	10000pass
CX680	500X500X28	3.2	680	45	11.3	9070	2.2	1.6	National Standard Grade A-1 Incombustible ASTM E84-01: Flame Spread:0 Smoke Density:0
CX800	500X500X28	3.6	800	45	13.6	10880	3.1	2.3
CX1000	500X500X28	4.5	1000	68	16.7	13600	3.6	3.1
CX1250	500X500X28	5.5	1250	68	19.1	17000	4.5	3.6

Application :
This kind of panel is suitable for high-class office buildings and offices of banks, tax administration, commercial and industrial bureau, customs, insurance companies, government and so on.

The panel is made of good quality cold-rolled steel sheet, which is punched, stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed and pure cement. The surface is stuck with anti-wear and fireproof high pressure laminate (HPL) or PVC tile. The borders are trimmed with or without conductive rubber edges.
The system is composed of panel, stringer and pedestal.The stringer and pedestal that are vertically adjustable are connected with screws, which forms the stable bottom bearing .The panel is inlaid in the square lattices enclosed by stringers.

Featured Benefits:
1、Designed specifically for computer room
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age

Technical parameter 

Panel Type	Size	Concentrated Load		Impact Load	Uniform Load	Ultimate Load	Rolling Load		Fire Protection
	MM	KN	LB	KG	KN/sqm	N	10pass	10000pass
CX680	600x600x35	3.2	680	45	11.3	9070	2.2	1.6	National Standard Grade A-1 Incombustible ASTM E84-01: Flame Spread:0 Smoke Density:0
CX800	600x600x35	3.6	800	45	13.6	10880	3.1	2.3
CX1000	600x600x35	4.5	1000	68	16.7	13600	3.6	3.1
CX1250	600x600x35	5.5	1250	68	19.1	17000	4.5	3.6

Application
The panel is mainly used for large or medium-sized computer rooms, communication centers, electrical control rooms, post and telecommunication hubs and other computer-controlled centers for the military, national security, aerospace and transportation.

WOODCORE Raised Floor System
38mm or 28mmthickness particle board panel 
4 pieces of black PVC strips along the side of the panel 
covering:Steelplate,HPL,Vinyl,rubber,Linoleum,Carpet  

   
Technical parameter

Clean Rooms are environments that must be totally clean. No dust, no dirt, no particulate. The airflow is designed to take microscopic particles down off the body, usually by a grated access floor. These floors are ventilation and the application is highly specialized. The floors are expensive compared with mainframe type raised floors. Clean rooms are typically found in hi-tech environments such as biomedical, microelectronic, pharmaceutical , semi-conductors , telecommunication equipment and laboratory facilities.

The panel is made of good quality cold-rolled steel sheet, which is punched, stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed and pure cement. The surface is stuck with anti-wear and fireproof high pressure laminate (HPL) or PVC tile. The borders are trimmed with or without conductive rubber edges.
The system is composed of panel, stringer and pedestal.The stringer and pedestal that are vertically adjustable are connected with screws, which forms the stable bottom bearing .The panel is inlaid in the square lattices enclosed by stringers.

      SURFACE OF PANEL                 BOTTOM OF PANEL

Featured Benefits:
1、Designed specifically for computer room
2、Made from non-combustible materials
3、Epoxy powder coated offers lifetime protection
4、Cementitious fill makes panels solid and quiet
5、Superior static, dynamic and ultimate load performance
6、Excellent rolling load performance
7、Easy maintenance and interchangeable panels
8、Class A flame spread and smoke development rating
9、No detrimental effect when attacked by moisture and termites
10、Excellent grounding and electrical continuity
11、All-steel pedestals provide excellent impact load performance
12、Does not deteriorate with age

Technical parameter 

Panel Type	Size	Concentrated Load		Impact Load	Uniform Load	Ultimate Load	Rolling Load		Fire Protection
	MM	KN	LB	KG	KN/sqm	N	10pass	10000pass
CXH680	600x600x35	3.2	680	45	11.3	9070	2.2	1.6	National Standard Grade A-1 Incombustible ASTM E84-01: Flame Spread:0 Smoke Density:0
CXH800	600x600x35	3.6	800	45	13.6	10880	3.1	2.3
CXH1000	600x600x35	4.5	1000	68	16.7	13600	3.6	3.1
CXH1250	600x600x35	5.5	1250	68	19.1	17000	4.5	3.6

Application
The panel is mainly used for large or medium-sized computer rooms, communication centers, electrical control rooms, post and telecommunication hubs and other computer-controlled centers for the military, national security, aerospace and transportation.